Parting Out 66 Tbird Landau

tbirdforum.com

Help Support tbirdforum.com:

Mark B

Member
Joined
Dec 20, 2013
Messages
11
I have a 1966 Tbird with a 1965 Front end (clip) that I will be parting out. It has a good engine 428 Q and C6 automatic transmission. All parts and accessories are off the car and ready to be shipped. Engine and Transmission are still in the car and will be pulled when sold. Let me know if there is anything that you need and I will send pictures, description and price. A few pictures are attached.
 

Attachments

  • photo 2.jpg
    photo 2.jpg
    52.7 KB
  • photo 4.jpg
    photo 4.jpg
    68.6 KB
  • photo f.jpg
    photo f.jpg
    60.6 KB
  • photo g.jpg
    photo g.jpg
    58.7 KB
Reason

I am parting out due to severe case of rust rot throughout floors, trunk, roof, etc. Taking a loss but plan to find something more structurally sound to restore.
 
Wiring

I'm looking for circuit breakers off the fue box, more likely the entire fuse panel with the circuit breakers. Fuses I have to spare. This will likely progress to an entire wiring harness so let's skip the middle man and I'lljust ask you your price on the entire wiring harness, front to back including the fuse panel. Also, if the dash & door panels are in decent shape, I might be interested in them as well
 
interior parts

Looks like your interior was intact and the same color as mine. Previous owner pulled everything out with intent to restore. I bought it in pieces. I have not assessed everything but know that there are missing pieces and some needing replaced. Do you still have panels and console? Trunk panels? All of my door rubbers are removed.
 
Looking for steering wheel shift lever

Do you have the steering column shift lever?

Also looking for power window relay (on center of firewall)

Let me know how much including shipping to 02359.

Thank you.

Ron
 
Some more wants

I'm also looking for the negative cables that run from the negative battery terminal to ground.

Also interested in the starter solenoid.

Thank you.

Ron
 
bracket/assembly
I'm apparently missing the bracket/assembly that bolts to the bellhousing, that allows the throttle pedal assembly to work properly. I can only get the carb to open 1/4 of the way. I'm told there is a bracket that the little rubber snubber hits against to allow the throttle to open completely. I have a 428/c6. If you have this part let me know .
Thanks!
 
I'm looking for the left and right brackets that the front of the leaf springs attaches to. I think one of mine is damaged. The one side doesn't look like the others mirror image. Thanks.
 
Don,
I never had a '66 that I was parting out. I had a bunch of parts I picked up in a deal, but no steering parts. MarkB started this post. Sorry.
 
parts

What condition are the door panels? Is the AC condenser the same as a 390? Condition of the kick panels?
Thanks Neal
 
How about all the parts necessary to convert a '64 to disk brakes? Hubs, brackets, calipers, disks? Not sure if the spindles are necessary?
 
Back
Top