Seal installiation

[Nitrous Bob]

Need some info on installing a couple seals,
1- The Hood to Rad support seal. Looking from the front, does the seal go in front or behind the bracket?
2- The cowl seal. Does the seal lay on top of the lip on the cowl panel, screws thru the seal first, then thru the cowl panel into the body?
3- Body to deck lid seal. The open end of the seal, does it fit with the fasteners toward the trunk area, or towards the bumper?
You wouldn't believe how much a person can forget trying to put one back together after 2 years.

 

[Terry64HT]

Bob, I've attached photo of my 64. The under hood shot shows the seal behind the latch. I've also attached a closeup of the seal and rivets. It's one of the few seals I haven't got around to replacing yet. Part of the underside of the hood cleanup. Next spring now.
There's also a photo of the cowl seal showing it between the cowl and the body. You can see the screws.
The body to deck seal photo shows the open end toward the trunk. You can just make out a couple of the fasteners.
Hope this helps
Terry
64HT

 

[Nitrous Bob]

Terry,
For some reason, your reply and pictures won't come up.

 

[Nitrous Bob]

Ok, got 'em now.
Thanks!