valhalla4771
Active member
- Joined
- May 9, 2015
- Messages
- 29
I'm reinstalling the oil pan and oil inlet tube to the oil pump. The gasket kit I bought has the seal for the tube connection to the oil pump. I can see the old seal still inside the pump. No idea how old it is, but it appears to be in good condition. But since i have a new one, might as well install it.
1. Will the old seal come out without any special tool?
2. When I install the new one, do I insert the tube into the seal before inserting into the pump, or do I put the seal into the pump first?
3. And am I correct that by leaving the connection at the oil pan end of the tube there will be enough wiggle room to get the tube into the pump?
1. Will the old seal come out without any special tool?
2. When I install the new one, do I insert the tube into the seal before inserting into the pump, or do I put the seal into the pump first?
3. And am I correct that by leaving the connection at the oil pan end of the tube there will be enough wiggle room to get the tube into the pump?
