tak65tiina
Member
- Joined
- Apr 26, 2012
- Messages
- 7
Hi all, I just joined here.
I recently had a guy install windows and regulators in my 55, did not turn out too well. I am trying to help him figure it out.
My car came to me with empty doors, had originally power windows but all the hardware was missing. I thought I'd go the economical way and have manual windows for now. Everything's installed now, the windows roll up and down with no binding but the RH one stops 2 inches below the roof rail. LH is better, only a half inch gap there. The upper stops are not stopping yet.
Further, the regulator assemblies seem a bit awkward to mount. When the lower bolts are tightened, there is about 2" between upper bolt holes and the inner door panel. Shop manual does not show any bracket there.
Any insights, anyone?
Thanks,
Tina
I recently had a guy install windows and regulators in my 55, did not turn out too well. I am trying to help him figure it out.
My car came to me with empty doors, had originally power windows but all the hardware was missing. I thought I'd go the economical way and have manual windows for now. Everything's installed now, the windows roll up and down with no binding but the RH one stops 2 inches below the roof rail. LH is better, only a half inch gap there. The upper stops are not stopping yet.
Further, the regulator assemblies seem a bit awkward to mount. When the lower bolts are tightened, there is about 2" between upper bolt holes and the inner door panel. Shop manual does not show any bracket there.
Any insights, anyone?
Thanks,
Tina