What do I need to add a stock supercharger to my 1995 3.8 V6?

[poehitman]

I want to add one of the stock superchargers onto my 1995 3.8 V6. How much modification is it going to take?

[Rolling-Thunder]

The 3.8 SC engine is built up with forged internals, whereas the "regular" 3.8 is not. It is not recommended to add the SC to the regular 3.8

[Birdman93]

Ditto-quickest way to find out how weak the internals are on a NA3.8L is install a superharger.

That goes for the V8s too-that's how I ended up with a Bell Blowzilla/Flowzilla setup for my 93 5.0L. The kid that owned it installed the huffer on a 5.0L with no internal prep and a motor that had gathered 275k HARD miles-he ran his first 1/4 mile with the huffer set up for 20 psi, and promptly scattered the bottom end within the first 60 feet. Track officials were a little mad at him-the crank broke and one section embedded itself in the asphalt-they had to close the track for 2 hours while they dug the crank out and patched the hole. :rolleyes:

[poehitman]

Well I guess that answers that question.