Clock Removal

Padre4art · #1 (**permalink**) IP: 98.237.3.11 04-25-2011, 10:26 PM

Hi - the Ford repair manual says to remove the clock remove two set screws from the pod (inside the car) and remove.

Do I need to disconnect the leads and lights from behind the dash first, or any printed wiring circuits or anything like that?

I don't want to just yank iut out and damage something!

Thanks for any experience and advice on this!

Art

gemman · #2 (**permalink**) IP: 98.69.149.15 07-29-2011, 05:41 PM

Art,
Did anyone reply to u ?? I am curious as to the answers to ur questions .. I have a clock on a '67 as well and am wondering what u did ... plz respond w/ what u did ... thaanx Gemman

Padre4art · #3 (**permalink**) IP: 98.237.3.11 07-30-2011, 02:01 PM

Hi - I haven't tried it yet.

THe repair manual says to remove a set screw from the pod surrounding the clock assembly, and remove it. SOunds too simple to me! Wires, etc!

I am afraid I haven't gotten much of a response to any of my questions on the forum, sadly.

gemman · #4 (**permalink**) IP: 98.69.149.15 07-30-2011, 03:53 PM

Art,
I am going to try what u suggest, and will let u know the outcome ... have u researched WHO can repair these ?? Gemman

Padre4art · #5 (**permalink**) IP: 98.237.3.11 07-30-2011, 04:31 PM

I have not tried them yet, but there is a company called 'Clock Works' that advertising they fix most automotive clocks for about $ 50 with fast turnaround time.

The Clock Works

Good luck - let me know how YOU make out!

Art

gemman · #6 (**permalink**) IP: 98.69.149.15 07-30-2011, 06:42 PM

Nice website .. will let u know ... thaanx Gemman

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)