Trans shift indicator troubleshooting

[RickAzz]

I’ve been going thru dash wiring (62 convertible) and replacing all old burned out bulbs. Everything is working except for the shift indicator lamp.

When I popped of the cover (on the top of the column) to expose the socket, I noticed that the wire was cut and the connection end was jammed into the socket. The end appears to be missing the proper fitting (where it goes into the socket) and I’m not sure we’re the other end (power side) is at.

I need this “pigtail” and not sure if it’s in the turn signal harness or a separate wire. Can’t find anything online (usual suppliers). Cant find any documentation in any of the ford manuals as well. Can’t even find a YouTube video on this.

Any help (parts sourcing) or anybodys help familiar with this would be greatly appreciated. Thx!
Rick

[RickAzz]

This is a picture I found that shows the wire I’m talking about. Notice the black fitting at the end of the wire (as it goes into the housing. The small piece of wire I have looks like this wire but it’s missing the black end.

[stubbie]

Try here
Thunderbird: 1961 - 1963: Wiring