big block parts anyone?

[Gearworks]

for those of you wanting to, or in the middle of, putting a 429/460 in these wonderful birds, i have recently bought out 2 different collections of big blocks all are complete and there are several very nice pieces in the bunch.

please feel free to leave me an email with youre needs and i'll sniff around to see if i have it...

later on guys,
paul
the gearworks

 

[Charles]

I don't need any big block parts, I'm keeping my 351W and warming it up a tad.
What I do need is an upper control arm. Anyone got one? The barer the better.

 

[g_lower]

if you would of said something alittle sooner I parted out a 79 cougar but it is long gone... past the crusher

 

[429Thunderbird]

What do you have...

Hey Gearworks,

I have a '69 429 Thunderjet C6 slighlty modified, from a '69 Bird (like to keep it in the family!). I need a powersteering pump and bracket. I have my '78 pump (the one with the plastic resovoir), and bracket on the block now but the lines are stretched to the limit and it's a little wobbly since I had to modify the bracket to make it work. Do you have something that works or any ideas on how to make it work? I'd also be interested in an A/C compressor and condensor.
Also, I put a set of 3.25 in the rear and need the correct speedo gear (the tranny has the original one from the '69, probably in the 2.75 or something like that)

I'm in the process of swapping cams now, I had the Performer RPM installed when I built the engine, great cam, but a dog off the start. I'm installing the Lunati 0096. Should be a little better. Any tips and tricks for swapping?

Thanks

JOE

for those of you wanting to, or in the middle of, putting a 429/460 in these wonderful birds, i have recently bought out 2 different collections of big blocks all are complete and there are several very nice pieces in the bunch.

please feel free to leave me an email with youre needs and i'll sniff around to see if i have it...

later on guys,
paul
the gearworks

 

[Gearworks]

Joe,
i believe i have everything you need to do the job. leave me an email at [email protected] and we'll go from there.

paul