Search results

Does anyone know what size O rings I need for my top motor on my 1966?

upper lid limit switch and gears I installed the E-limit switch and the system is working. Now, I will put the upper lid back on and see if the system works without addressing the upper panel gear box. The worm gear looked ok as well as the brass gear. The brass gear looked the same all the way...

upper lid limit switch and gears I received my E-limit switch from Thunderbird Ranch and before I installed it, I ran the upper lid up and checked the play in the arm. It was ok. Then I ran the arm to the down position and there was a lot more play in it. 1/2 to 3/4 inch play. So, I took the...

Boaterbob Thanks Boaterbob. I adjusted the limit switch again and the top started to retract. It looks like the system is in sync., but the set screw on the outer rotary is puling through the plastic. I may have popped it earlier. At least I now know what the problem is and will replace the...

Thanks Boaterbob Yes, I checked the switches at the cylinders for the deck. They were good. I also checked the connections at the relays and filed a few to make sure they are conducting properly. The site you sent me looks very complete as to how to adjust the limit switch. I will try it today...

I have a 1966 convertible. The top was in the final stage as the deck lid stopped half way down. I have checked all of the switches and relays and here is where I am in the process. After adjusting all of the switches and making sure they are working properly, with the top up, I can get the deck...