[verdejor]

Ok. I've had great luck with all the help so far. (I contribute too lol)
My issue:

I rewired the entire car. My gas gauge was acting funny (showing full when empty--fixed)

the oil press gauge does not read anything nor the coolant. Depending on how I wire it I can get the gauges to read High---not what I want. I want to get them operating correctly.

Looking at the wiring schematic for the car, I see the guages get power and the other side goes to the sensor and a ground. From what I interpret, Ground is from the sensor itself. I have no teflon or any other thing that may void a ground.

Any tips? thanks all!