|
The start....
O.K., here's the start to 100's of questions!!
On my brake-booster there is the usual fitting for vacuum, it has one large and one small hose fitting coming out of it, the big one has the hose to the manifold but the other one has a 1" length of hose attached to it and is blocked with a 1/4 or so diameter screw pushed into it, where is this smaller hose actually meant to go to??
2nd Question, what is the 'gizmo' on the inner fender directly below the master cylinder that the brake line goes into? it looks like it has a large diameter thread going into this 'gizmo', the threaded bit face towards the motor.
Hope y'all can help,
Tom
|