OK guys I need some help. I have a 65 T-Bird dubbed "Dirty Bird" Have been working on several things at once to include, new Accel super coil, new 8MM Accel wires, and new cap. I have previously installed a Pertronix system and she ran fine. Now she wont start at all. No popping, no backfiring. Motor is a 390 FE.
Wires are in their correct locations. I do have good spark from the coil and spark at the plugs. My question seems to be do I have enough spark at the plugs.
Heard something about a ballest resistor that either I do have and dont need or don't have an do need.
Anybody out there run into a similar problem and how did you correct it?
Thanks,
Ken