|
When I was troubleshooting my convertible tops on different tbirds I have had I just made up a jumper wire, it is really simple. Just buy some 10 guage wire at autozone with some crimp on spades and a crimp on aligator clip. the aligator clip goes on the the tail of the Y and the spades at the top of the Y. All you do is remove the boot from the circuit you want to operate the stick the 2 spade ends into the boot and then touch the aligator clip to the powerbar that attaches the relays all together. This will work the circuit for you without needing a switch. Another alternative is to replace all the relays with a moderm replacement relay system that I put in my 65 convertible and it worked super great. Good luck and keep us posted on your progress.
sincerely
pj
__________________
Home Of tbirdforum.com
|