Brian,
Detailed instructions on the procedure are in the Shop Manual on page 8-8. Fig. 20 on page 8-9 shows a large illustation of the switch.
I'll try to expand on their instructions and hope I don't make it impossible to understand. On the outboard side of the switch, there is a spring loaded button between the two spade lug contacts. Push this button inward while you pull and twist the headlight knob outward. When the knob is removed, the chrome plated threaded sleeve can be turnec with a blade screwdriver and removed. At this point, everything is apart, and you can remove the switch. Assembly is much easier. You don't even have to think about the release button.
Easy Huh? Tom
|