Quote:
|
Originally Posted by Birdman93
NOTE:
Use snap-ring pliers to spread retainers, then pull straight upward to disengage.
1. Remove three metal headlamp mounting clips (13N129), attaching headlamp (13008) to grille opening panel, from the rear of panel.
2. Remove headlamp from vehicle and remove headlamp bulb and retainers (13N021).
3. To install, reverse Removal procedure.
|
Thanks!! This worked great. Now to get the lights alligned. Any suggestions to get to the lower bolt without removing the housing? I think it will be impossible to get a ratchet to the lower screw to adjust, maybe i'll pickup a 5/32 wrench.
Anyway the new lights look great, I didn't realize how yellow the other ones were.