|
Totally agree with Yoda.
The wiper "switch" is actually just a lever which pushes/pulls on a cable attached to the wiper motor under the cowl.
If the wiper lever moves loose as a goose, the the cable has come loose at the wiper lever at the dash or at the wiper motor located under the cowl.
If the wiper lever is not loose as a goose, the cable lock down screw by the wiper motor has come loose.
Where the cable is attached to the wiper motor:--- manually push on the motor lever until the wipers shut off and tighten the cable lock down screw.
If you cannot manually shut off the wipers let us know.
|