|
It easy to expose the hydraulid pump in the rear passenger fender, accessing from the trunk, remove the plug to the resovour, using a turkey baster with a bulb on one end you can easly remove the fluid and put it in a glass jar. This will allow you to see the condition of the fluid and any solids will settle to the bottom. There are two fluids used to refill the system. The orginal system used brake fluid and rubber seals in the cylinders. Retro fits, later installations used neoprene seals and require the red colored transmission fluid. Check to see what you have in your system. Work the system a few times then empty and refil he Reservoir. It is easy to do even for the novice.
Gregory
|