I don't think the Oil Feed Line has to change ??? I used the same Oil Feed line when I swapped my IHI for a T3 (out of an SVO). I did swap the brass elbow feed line fitting on the T3 with the one from the IHI though. Isn't that OK ?
Turbonetics sells a T3 Oil Return Line Flange and 1/2" FPT fitting (around $13.00 for both). I used the block side portion of my IHI Return line (cut off) and ran a braided hose between it and the Turbonetics flange.
[This message has been edited by Dan Eaves (edited 09-10-2000).]
|