Quote:
Originally Posted by fberritto
90 vs 30 Amps
|
Buy one of these
https://www.amazon.com/ZOOKOTO-Circu...3395131&sr=8-4 or similar, and mount it where your old regulator was after you remove it.
Print out this diagram and look at where I put numbers 1,2 and 3 in red boxes. Zoom in if you have to.
#1 powers your horn relay. Use the output terminal of the circuit breaker for that wire.
#2 yellow powers the battery. Use the output terminal of the circuit breaker for that wire. It should be at least a 12 gage wire.
#3 yellow-black is your old generator output. Use that for your new alternator output, and connect to the input terminal of the circuit breaker. It should be at least a 12 gage wire.
Use all crimp-on connectors of the proper size.