|
I ran into a similar problem. I had asked tech support at Classic to make sure their compressor setup would work with my pulley setup. Had the original crank pulley with 2 inner pulleys and they assured me it would work. Non A/C pulley setup on my 65 did not work. I had a pulley off a 1970 pickup that worked well but requires you bend the timing pointer up slightly as the pulley is very slightly bigger. Your right Stubbie. When installed it looks very non intrusive and works well. Only other issue is that I was low on charge this year and the high pressure line oozed oil out of the bubble crimps over the winter. I guess another suggestion is to have the lines made up locally and use steel fittings instead of the aluminum ones that are pre fabed for you. Steel can be crimped a little tighter.
|