|
When the doors are closed, the gaps are even. As I close the door, it rides up on the shoulder of the door jam (just above the door striker plate) and on the protrusion near the top. The paint is worn off at both these locations (see the arrows in the photo). The hinge bolts are all tight, but with the door open, it doesn't seem to move up and down when I try by hand. If it did, I would know it's the hinge pin bushings. I've looked closely and there is no visible indication that the hinges have shifted at all.
The more I look at it, the more I suspect the bushings, but I can't figure out how they are replaced.
Any advice would be appreciated.
Terry
64HT
|