|
Yes, I did. I'm sorry I should have replied that I did. The photos definitely helped me to properly install the torsion bars. After they were installed the back of the trunk started to lift as the trunk was being closed and it just would not close properly no matter what tension was applied. So I removed the one that was out when I started the project. The previous owner no doubt had the same issue. So I was thinking about gas shocks or something along those lines. I never considered the possibility of what Randy describes. What he suggested make sense based on the results I got when installing the 2nd torsion bar. So after my engine is complete I will check those hinges and go from there. Thank you so much for your follow up.
|