[ozzy351]

Thanks for the reply Bob.

I found the mounting holes for the washer motor/pump. For some reason they were covered over with filler and the black power wire is dangling down below the starter relay. The other odd thing is there is no red factory washer bag or mounting bracket. There are two dimples on the right front inner fender where I assume the bracket mounts but they are not drilled out for the mounting screws.

I can't see a relay mounted to the firewall behind the engine. The only relay I can find is at the front left bolted directly below the A/C hoses next to the radiator and is about 4" x 2 1/2". The wires from the starter relay run from right to left in front of the radiator to the relay.

Regards,
Chris.