|
Like others, I think you have to try to get your sequencer working before you go to the electronic. I had a similar problem--my gunsights would sometimes just pulse but not flash. Other times all worked fine. I noticed when the pulsing was happening the third turn signal light would not work. This was the same when I used blinkers on both sides. I removed the sequencer, took off the black cover, pried/slid off the white plastic cover, sprayed dirty points with contact cleaner and put it all together. I could tell there was black dust on everything and it was dry. When I put it together it all worked great. It took about 30 minutes and cost nothing to fix. How often does that happen?
|